Product details

3P8 on track

KEY FEATURES

Max continous output power
22 kW
Auto feed
Yes
Slip clutch
Yes
Storage capacity
20
Extra
All wire saw modules weigh less than 25 kg each

Combines low weight with extraordinary performance for both small and big jobs. Track system as rig.

Technical strengths

  • Easy Setup

    The wire can be run over all wheels on the machine without opening the wire. The wire can be run also over the adjustable swivelling wheels, without having to cut the wire. The 3P8’s design allows for direct cuts to be made, and satellite wheels can mostly be omitted

  • Big storage capacity

    Wire storage capacity without external pulley, approximately 16 m. Two 1.2 m columns = approximately 1.4 m of travel = 11.2 m storage

  • Easy start of the wire

    The high starting torque makes it easy to start the wire over sharp corners and irregularly shaped objects. Normally corners do not have to be chamfered before the wire is started. On the 3P8, the wire can be started and reversed several times to simplify start-up. A groove can be cut also on the slack side before starting to cut.

  • Automatic feed and wire tensioning

    Automatic feed, without air cylinders or need for compressed air. Wire tensioning is fully automatic, with some exceptions. The tensioning of the wire is governed by software and a microprocessor / digital servo amplifier driven electric feed motor.

  • Continously variable cutting speed

    The cutting speed is continuously variable from 0 to 21 m/second (4100 sft/min), when driven by the 18, (25HP), 22 kW (30HP) or the 27 kW (37HP) motor.

  • Exceptional cutting results

    Normal results in concrete, using a wire that is well adapted to the high power of the 3P8 wire saw are between 3 – 6 m² 32 – 64 sq ft per hour in reinforced concrete containing “normal” aggregate and between 1.5 – 3 m², 16 – 32 sq ft per hour in reinforced concrete containing flint or river gravel aggregate.

Documents