Track system TS0.85 Track, 0.85 / 33" TS1.15 Track, 1.15m / 45" TS1.7 TS-track 1.7 m /67" TS2.0 Track, 2.0 m / 79" TS2.3 Track, 2.3 m / 90.5" TS3.45 Track 3.45 m / 135" TF2S Track foot Track foot, symmetric for TS-track TFAB Angle cutting attachment Angle cutting attachment, to be bolted to TF2S Track foot for TS-track TSS300 Joint block Joint block for TS-track TP3 Trackstop Track stop for TS-track Please note: For safety reasons one track stop must be used in each end of the track. BTS4 Base plate for TS-track, rectangular, 220 x320 mm WT-BTS4 Wheel kit for BTS-4 base plate. BTS5 Base plate for TS-track, rectangular 380 x 290 mm. For wire sawing and heavy dury drilling. WT-BTS5-200 Wheel kit for BTS5, Ø 200mm wheels WT-BTS5-300 Wheel kit for BTS5 base plate, Ø 300 mm wheels HL-TS1 Handle with levels. For Pentruder universal drill rig. RST-TS1 Rear support for TS-track CEG-PDT1 Carriage CEG-PDT1 pivoting head for TS track. Pivots 360 degrees. Rear support included. CT-CEL Back support for CEL-TS CEL-TS Carriage for line and corner drilling with TS track. CEG-E-3P8 3P8 wire saw upper carriage, which glides on the track with teflon liners. Electric automatic feed. Total gear ratio 5000:1. Max feed speed 0.4 m/min CEG-E-MD1 Gliding carriage for both MD1 core drill and lower carriage for 3P8 wire saw, electric feed, total ratio 2500:1. Max feed 0.8m/min. CEG-M25 Gliding carriage for both MD1 core drill and lower carriage for 3P8 wire saw, manual feed, gear ratio 25:1 CER-M3-MD1 Roller type carriage for drilling with the MD1 Core drill. QDC coupling. Manual feed, ger ratio 3:1. CER-M3-U Universal roller type carriage for drilling. Manual feed, gear ratio 3:1. CEL-CN Line and corner drilling carriage for TS Track and CN 70 mm column. Drill template Drill template for placing the track foot correctly according to planned cut. Drill template - double Drill template for placing the track foot correctly according to planned cut.