Pentpak 25

The Pentpak 25 hydraulic power pack is designed to a unique concept, based on many years of experience and know-how in this field. The Pentpak 25 power pack is the most compact design on the market in it's power class and offers outstanding performance combined with reliability, safety and ease of handling.

Features
Technical data
System
Accessories

Versatile	Soft-start	Safe build
The Pentpak can drive many different hydraulic machines.	The power pack is equipped with an electronic soft-start and can normally be run on 25 – 63 Amp fuses. Even 16 Amp delay fuses can be used for less demanding jobs, but the cutting capacity is then, of course,very much reduced.	All electrical and hydraulic equipment is protected under strong covers and can not easily be tampered with. The only device that can be operated is the Emergency Stop button and the feed regulation valve.

Excellent cooling of the motor	Integrated motor	Low weight - high power
The electric motor is water cooled by means of a specially developed system which provides excellent cooling of the motor around its entire periphery, no hot spots occur that can damage the motor.	The electric motor is completely integrated in the design for superior power to weight ratio.	Notwithstanding the diminutive dimensions and low weight of the Pentpak 25, 139 kg, the electric motor output is a remarkable 25 kW alt. 28 kWcontinously. The 28 kW is valid for Pentpak 25 with a new stronger motor, which also has a somewhat higher amperage draw.

Remote control	Self draining	Protected from overheating
For optimum safety and manoeuvrability all functions are controlled through a hand held remote control unit. The operator can therefore always be in the safest and best possible position for complete control of the machine.	Normally water cooled electric motors are regarded to be prone to freeze and crack at sub zero temperatures. For the Pentpak 25 the risk is substantially reduced as the system empties itself as soon as the inlet and outlet water quick disconnect couplings and hoses are removed.	If the power pack is run using an inadequate supply of cooling water, the motor is still protected from overheating by means of a temperature sensing device. This sensor will shut off the power supply if the motor temperature exceeds a preset value.

Operator's manual
Pentpak 25 and Pentruder 8-20

Pentpak 25
25 kW hydraulic power pack

	Pentpak 25
Output power continously:	25 kW / 28 kW
Electric motor:	Water cooled, self draining
Starting apparatus:	Automatic softstart
Power source requirements:	3 x 400V 50 Cycles Min 32 Amp fuses
Current at no load:	11 A
Current at 15 kW:	26 A
Current at 20 kW:	36 A
Current at 25 kW / at 25 kW:	45 A / 54 A
Oil flow main circuit:	80 L/min
Working pressure:	25 kW: 165 bar 28 kW: 185 bar (only with wall saws with the 8-20 support bearings)
Oil tank volume:	9 L
Secondary oil flow (movements):	12 L/min
Oil filter:	10 micron absolute
Height:	60 cm
Width:	31.5 cm + wheels
Depth:	50 cm
Weight:	139 kg

Part number	Description	Quantity
09020201	Pentpak 25 kW 400V 50Hz*	1
52050101	Pressure/Return hose 6-16 Length 8m	2
52020101	Hose pack for 6-16 Length 8m1	1
64190301	Remote Control hydraulic cpl	1


Remote control		Flow divider
The Pentpak 25 is used together with the remote control, 64190801.		The flow divider, SFD 45/55, is intended to be used first of all together with the Pentpak 25 hydraulic power pack to split the main flow of 80L/min into two smaller flows, namely 35 and 45 L/min. The 35 and 45 L/min flows are chosen to reflect the requirements of hand held circular and chain saws, drill motors and wire saws. The SFD45/55 can be used with any other power pack and will then divide the flows to be 45% in one position and 55% of the incoming main flow in the other position.

Pentpak 25

Features

Technical data

System

Accessories

Versatile

Soft-start

Safe build

Excellent cooling of the motor

Integrated motor

Low weight - high power

Remote control

Self draining

Protected from overheating

Pentpak 25

Remote control

Flow divider